2019 PP PE地膜薄膜清洗线

 

1: Recycling plastic packaging film, agricultural film, greenhouse film PE/PP plastic, PE/PP plastic garbage mixture.

2: Waste PP woven bags, plastic bags, household garbage plastics, waste plastic film mulch.

3: The production line is developed through the introduction and absorption of advanced concepts and technologies of the same industry in the world, combined with the needs of today's development and the secondary application of waste plastics, and can meet the environmental protection requirements for waste plastics recycling at home and abroad.

4: According to different materials and production requirements, we have different crushers and dewatering equipment

5: Our company specializes in producing PE/PP and floating material recycling cleaning line, PET and sinking material recycling cleaning line, film recycling cleaning line and granulation equipment.

1. After the plastic and film recycling cleaning line is installed, check the fastening condition of each fastener. If it is loose, it should be tightened. Also check that the belt tightness is appropriate.

2, plastic, film recycling cleaning line and power unit to be installed firmly. Ensure that the power machine (diesel or electric motor) and the pulley groove of the plastic and film recovery cleaning line are on the same rotating surface.

3. Before starting the plastic film recovery cleaning line, first turn the rotor by hand to check whether the teeth, the tool holder and the flywheel operate flexibly and reliably. There is no collision in the crushing chamber. Whether the rotation direction of the rotor is consistent with the direction indicated by the machine arrow, the power machine And plastic, film recycling cleaning line lubrication is good.

4. Do not change the pulleys casually, in case the rotation speed is too high, causing the explosion chamber to explode, or the rotation speed is too low, which affects the working efficiency of the plastic and film recovery cleaning line.

5, work should pay attention to the operation of plastic and film recycling cleaning line at all times. First, the feeding should be uniform to prevent the crushing chamber; secondly, do not overload the machine for a long time. If any vibration, noise, bearing and body temperature are too high, and the material is sprayed outward, stop the machine immediately and check it out.

6. After the plastic and film recovery cleaning line is started, it should be kept idling for 2~3min. After no abnormal phenomenon, it should be put into operation.

1. Granulator: film, woven bag, ton bag, fishing net, sheet, single and double-stage granulation line, single and double screw granulation line

2, Washing line: PP, PE, PET, film, bottle, sheet washing line;

3. Extruder: single screw extruder, conical twin screw extruder, parallel twin screw extruder;

4. Water ring dicing die, film dewatering and extruding machine, squeezing and granulating machine, centrifugal dewatering machine, pelletizing machine, shredder, crusher, plastic auxiliary machinery and other equipment.